1. Home
  2. Chassis & Axles
  3. Rear Axles & Components
  4. 1-1/4 Axle Non-Greased Bearing fits 62mm Cassette
1-1/4 Axle Non-Greased Bearing fits 62mm Cassette
152-19B 1-1/4 Axle Non-Greased Bearing fits 62mm Cassette
Write a Review

1-1/4 Axle Non-Greased Bearing fits 62mm Cassette

Part Number: 152-19B
Online Price: $9.95
1-1/4" x 62mm Standard Racing Ball Bearing – Free-Spinning with Set Screw Locking
Availability: In Stock.

Send to:

*We'll ask for shipping info at checkout

Description

1-1/4" x 62mm Steel Ball Bearing – Free-Spinning, Set Screw Locking for Racing Cassettes


This 1-1/4" x 62mm Standard Steel Ball Bearing is engineered for performance in LTO (Left Turn Only) oval racing go-karts and racing mowers. Designed with low-contact seals and minimal grease, this bearing spins freely with reduced drag — perfect for high-speed applications where efficiency matters.


Ideal for use in 152-40 Billet Cassettes or 8127 3-Hole Bearing Flanges, it features a set screw locking system(1/4"-28) to secure the bearing firmly on the axle. We recommend applying Lubtek or Tri-Flo bearing oil before every race to maintain smooth, long-lasting performance. Avoid penetrating oils, as they may reduce bearing life.


Bearing Specifications:

  • Bore Diameter: 1-1/4"
  • Outside Diameter: 62mm (˜ 2.45")
  • Outer Race Width: 20mm (˜ 0.75")
  • Total Width: 38.1mm (˜ 1.5")
  • Locking Mechanism: Dual set screws (1/4"-28)
  • Design: Free-spinning, oil-filled
  • Seals: Low-contact for reduced resistance


deal For:

  • Oval Racing Go-Karts (LTO)
  • Racing Lawnmowers
  • Custom Builds using 1-1/4" Axles
  • 62mm ID Bearing Cassettes (e.g., 152-40)
  • 62mm Bearing Flanges (e.g., 8127)


Performance Note:

For optimal performance, oil the bearing before every race. These bearings are intended for racing, not general-purpose industrial use.

FAQ

What does this bearing fit?

This bearing fits 1-1/4" axle shafts and is designed for 62mm ID cassettes or flanges, such as the 152-40 Billet Cassetteor 8127 Bearing Flange. It’s commonly used in oval racing karts (LTO) and racing lawnmowers.


Is this bearing pre-lubricated?

The bearing is free-spinning with little to no grease and should be oiled regularly with bearing oil (Lubtek or Tri-Flo). Do not use penetrating oil, which can reduce bearing life.


Does it include a locking mechanism?

Yes. This bearing features dual set screws (1/4"-28) to lock securely onto the axle.


Can I use this bearing for general-purpose equipment?

It’s designed specifically for racing applications such as go-karts and racing mowers. For industrial or heavy-load use, consider bearings designed for general-purpose machinery.


How many bearings do I need for a go-kart rear axle?

Most go-karts use two bearings—one for each side of the rear axle—depending on your chassis and cassette or flange setup.

Related Items

5/8
$14.00
In Stock.
1-1/4 x 35-Inch Tubular Steel Rear Go Kart Axle
$77.99
Out of Stock.

Recently Viewed Items