1. Home
  2. Carburetors
  3. Tillotson
  4. HL-Series
  5. HL-348A, B, C
  6. 363-517 Tillotson Nozzle Check Valve
363-517 Tillotson Nozzle Check Valve
363-517 Tillotson Nozzle Check Valve
Write a Review

363-517 Tillotson Nozzle Check Valve

Part Number: 363-517
Your Price: $9.17
Availability: In Stock.

Send to:

*We'll ask for shipping info at checkout


The Tillotson Nozzle Check Valve has the primary function of protecting the inside of the carburetor in case of a back-fire. 

The check ball seals off the inside of the carburetor preventing damage. While the nozzle length and shape can influence signal and the carburetor’s tune, the check ball itself is not a tuning mechanism. 

If you experiencing a flooding condition where the high side is leaking fuel at idle the check ball is not the cause of this problem. Most often this is due to a leaking seat and or needle valve not sealing.

Most Tillotson Nozzles are press-in but there are some carburetors that use a threaded nozzle. Be sure of which one comes in your carburetor before pressing them out. When replacing the nozzle make sure the adjustment screw is not in the body as it may damage the needle. When the nozzle is put back in making sure the side hole lines up with the pick-off hole, the hole of the fuel circuit where the adjustment screw goes, or you may experience tuning and performance issues. 

Always check your carburetor listing before ordering and if you don’t have a listing measure the length and diameter to match your nozzle. 

Nozzle Length: 0.435

Nozzle Diameter: 0.25"

363-517 Nozzle Check Valve fits the following Tillotson HL carburetors: HL-264B,HL-314A,HL-314E,HL-348D

Related Items

RK-104HL OEM Tillotson Double Stack Rebuild Kit
Out of Stock.

Recently Viewed Items