The 4062K EC Front Steer U-Build-It Kit provides many of the components to build you own front steer front axle for racing lawnmowers and other small engine vehicles. 

All you should need is front beam, tie rods and drag links with the accompaning hardware to build axles to your desired specs. If you are running USLMRA or ARMA we recommend using one of our front axles built to the spec of those class rules.

Front Steer Spindles are most commonly built for prepared class race mower that uses a stock chassis that has more ground clearance than the FX or Outlaw classes. The front steer means the tie rod that connects the two spindles is in front of the axle beam and the left side spindle has a drag link arm that connects to the pitman arm on the steering shaft via a drag link tie rod. 

These spindles do not come ready for front brakes. To set them up for front brakes you’ll need to notch the spindle axes for a brake key. The axles are standard 5/8” and will use 5/8” front hubs.

Kit Items:
4x 728 1/2" Heim Joint (Not Drilled)

4x 50FNFJ0Z 1/2"-20 Jam Nut

6x 50FNsJ0 1/2"-20 Slotted Jam Nut

2X FCRP-4053 Aluminum Caster End Plates

2x Steel Caster Back Plates

2x 50F45HCS5Z 1/2"-20 x 4-1/2 Hex Bolt (Not Drilled)

12X 4065 1/2" x .154

1X 4062 EC Front Steer Spindles

14X 2511 5/8" Spindle Spacers Radius

2X 62FNSJ0 5/8"-18 Slotted Jam Nut

8X 999-31 Large Cotter Reuseable Pins