1. Home
  2. Chassis & Axles
  3. Front Axles & Components
  4. 605K Rear Steer U-Build-It Kit
605K Rear Steer U-Build-It Kit
605K Rear Steer U-Build-It Kit
Write a Review

605K Rear Steer U-Build-It Kit

Part Number: 605K
Your Price: $219.00
Availability: Out of Stock.

Description

The 605K Rear Steer U-Build-It Kit provides many of the components to build you own rear steer front axle for racing lawnmowers and other small engine vehicles. 

All you should need is front beam, tie rods and drag links with the accompaning hardware to build axles to your desired specs. If you are running USLMRA or ARMA we recommend using one of our front axles built to the spec of those class rules.


Rear Steer Spindle are most commonly built for FX or Outlaw class race mower that are allowed to used boxed frames and lower ride height than the more traditional Prepared-Style Chassis that require the use of a stock lawnmower chassis. The rear-steer means the tie rods are behind the rear of the front axle. This setup resembles familiar go kart steering system with two tie rods connecting to the pitman arm of the steering shaft. 


These spindles do not come ready for front brakes. To set them up for front brakes you’ll need to notch the spindle axes for a brake key. The axles are standard 5/8” and will use 5/8” front hubs.



Kit Items:
4x 728 1/2" Heim Joint (Not Drilled)
4x 50FNFJ0Z 1/2"-20 Jam Nut
6x 50FNsJ0 1/2"-20 Slotted Jam Nut
2X FCRP-4053 Aluminum Caster End Plates
2x Steel Caster Back Plates
2x 50F45HCS5Z 1/2"-20 x 4-1/2 Hex Bolt (Not Drilled)
12X 4066 1/2" x .154
1X 605 EC Rear Steer Spindles
14X 2511 5/8" Spindle Spacers Radius
2X 62FNSJ0 5/8"-18 Slotted Jam Nut
8X 999-31 Large Cotter Reuseable Pins

Recently Viewed Items