1. Home
  2. Chassis & Axles
  3. Front Axles & Components
  4. EC Rear Steer U-Build-It Kit for Outlaw Race Mowers/Go Karts
EC Rear Steer U-Build-It Kit for Outlaw Race Mowers/Go Karts
605K Rear Steer U-Build-It Kit
Write a Review

EC Rear Steer U-Build-It Kit for Outlaw Race Mowers/Go Karts

Part Number: 605K
Your Price: $239.99
Rear Steer U-Build-It Kit
Availability: In Stock.

Send to:

*We'll ask for shipping info at checkout

Description

The 605K Rear Steer U-Build-It Kit provides many components to build your own rear steer front axle for racing lawnmowers and other small engine vehicles. 



All you should need is a front beam, tie rods, and drag links with the accompanying hardware to build axles to your desired specs. If you are running USLMRA or ARMA, we recommend using one of our front axles built to the spec of those class rules.



Rear Steer Spindle is most commonly built for FX or Outlaw class race mower to use boxed frames and lower ride height than the more traditional Prepared-Style Chassis that require the use of a stock lawnmower chassis. This setup resembles a go-kart steering system with two tie rods connecting to the steering shaft's pitman arm. The rear-steer means the tie rods are behind the rear of the front axle. 


These spindles do not come ready for front brakes. You'll need to notch the spindle axes for a brake key to set them up for front brakes. The axles are standard 5/8" and will use 5/8" front hubs.



Kit Items:

4x 728 1/2" Heim Joint (Not Drilled)


4x 50FNFJ0Z 1/2"-20 Jam Nut


6x 50FNsJ0 1/2"-20 Slotted Jam Nut


2x FCRP-4053 Aluminum Caster End Plates


2x Steel Caster Back Plates


2x 50F45HCS5Z 1/2"-20 x 4-1/2 Hex Bolt (Not Drilled)


12x 4066 1/2" x .154


1x 605 EC Rear Steer Spindles


14x 2511 5/8" Spindle Spacers Radius


2x 62FNSJ0 5/8"-18 Slotted Jam Nut


8x 999-31 Large Cotter Reuseable Pins


Related Items

40-Inch Outlaw Drop Front Axle Using Front Brakes and 8.25-Inch Wheels
$369.99
Axles take 5-10 business days to build

Recently Viewed Items