Talk to a performance expert
mon-thurs 9-5 cst
They also work on 196 Clones, Tillotson 196/212/225, Ducar 196/212, and Predators 212 Engines.
We highly recommend using a stud kit for high output race engines. High compression and high rpm engine will stretch the OEM Chinese bolts and cause blow head gasket or worse destroy your race engine and cost you the race.
Torque Instructions: Torque studs to 60 in/lbs and use red Loctite to the studs on the block side to secure the stud. Be careful not to over-tighten the stud, which can damage and split the block. By using red Loctite this can permanently hold the stud in the block. Torque the nuts to 200 in/lbs
4 Head Alloy Steel Studs
4 8mm Serrated Flange Nuts