1. Home
  2. Carburetors
  3. Dominator
  4. GX200/Clone/Predator 212 Dominator
  5. HL-304WX-5K Dominator Plus Alky Tillotson Carburetor Kit for Big Valve GX200/Clone
HL-304WX-5K Dominator Plus Alky Tillotson Carburetor Kit for Big Valve GX200/Clone
HL-304WX-5K Dominator Plus Alky Tillotson Carburetor Kit for Big Valve GX200/Clone
Write a Review

HL-304WX-5K Dominator Plus Alky Tillotson Carburetor Kit for Big Valve GX200/Clone

Part Number: HL-304WX-5K
Your Price: $349.99
Availability: In Stock.

Send to:

*We'll ask for shipping info at checkout

Description

HL-304WX-5K Dominator Plus Alky Tillotson Carburetor Kit for Big Valve GX200/Clone

The EC Dominator is machined and blueprinted for Open or Big Valve Honda GX200 and other Small Block Clone, Predator or Tillotson Engines

Our EC Dominators have been “dominating” the competition, setting records and winning races for decades. Our expert knowledge and years of winning history goes into each hand built Dominator Series Carburetor. Our team of EC engineers developed the only 4-cycle carburetors for Tillotson including the “infinite radius” design to improve flow and fuel signal making it superior from to other stock diaphragm carburetors. 


We then prepare the Tillotson carburetor for each engine combination to maximize performance and to push the rule book for every advantage and still pass inspection.

There are dozens of procedures our master carburetor technicians go though to create the dominator plus carburetor here a few we listed:
• The velocity stack in permanently attached and machine matched to the carburetor body
• The carburetor body is machined and highly polish to maximize flow
• The throttle shaft is polish and aligned for max flow
• A hand made trix throttle shaft screw
• The fuel circuit is machined and calibrated to increase acceleration and max power.

Kit includes
• Intake manifold
• Round-Style fuel pump
• Fuel Filter
• Linkage Kit

Fuel: Methanol(alcohol) pure methanol only; DO NOT BUY METHANOL WITH TOP LUBE OR ADD TOP LUBE.

Caution: WILL NOT WORK WITH ETHANOL E-85 or E-91 or any other type of ethanol.

Bore: 1.00”

Venturi: .900”

Hi Side Needle Initial setting: 1 turn out

Low Side Needle Initial Setting: 2-1/2 turns out

Caution: Use only the Walbro FPC-1 or TFPC-1 Round-Style Fuel pumps!

Fuel pumps we do not support with our carburetors:

B&S fuel Pump

Mikuni, and Mikuni knock offs

Plastic knock off of the Walbro WIP fuel pump (square pump)

No electric fuel pumps.

If you have a fuel pump you rather use please give us a call so we can advise you.

Recently Viewed Items