The EC Pro Gasket Kits are exclusively constructed for professionals in the small engine racing world.
We designed our kits using OE parts or equivalent to superior aftermarket components. Our aftermarket components prioritize racing condition durability and performance over cost and price margins of other aftermarket parts.
Our kits also include additional components to better complete the rebuild or service performed on your carburetor.
We also include a parts diagram without Pro kits something no other OE or Aftermarket kits include. That has a parts break-down list that helps identify Tillotson carburetor parts as well as shows the carburetors assembly. This helps the D.I.Y. racer to know their carburetor is reassembled correctly.
Our Pro Kits utilizes our Ð²Ð‚ÑšFast ActionÐ²Ð‚Ñœ Main Diaphragm. This component is one that we made in the aftermarket as a performance upgrade over OE and other aftermarket metering diaphragms. This main metering diaphragm has improved response and reaction over standard metering diaphragms. The Ð²Ð‚Ñšwagon wheelÐ²Ð‚Ñœ features a more consistent dowel height in the center making the fulcrum height adjustment for consistent as well as a better, more smooth metal finish compared to other diaphragms.
This kit uses the 0.040Ð²Ð‚Ñœ High Volume Fuel Pump Diaphragm Gasket. This allows more volume to be pumped by the diaphragm. This is often a tech item in kart racing.
This kit includes what we normally call the short gas seat. It's a short seat with a .062Ð²Ð‚Ñœ orifice vs the .093Ð²Ð‚Ñœ of the larger alky seat. This type of seat is used almost exclusively for gas engines especially piston port 2-cycles and small block 4-cycle engines. This is the only difference between the P3-RK and P5-RK. Check your carburetor and carburetor listing before ordering.
The Fulcrum and Inlet Fuel Needle Valve are captured in this kit. Captured is where the fulcrum arm with a fork end Ð²Ð‚ÑšcapturesÐ²Ð‚Ñœ the dowel on the head of the needle. A captured needle keeps the fulcrum arm in contact, this is usually preferred on rougher tracks and if the carburetor is orientation is with the fuel pump stack facing downward.
Ð²Ð‚Ñž Fast Action Main Diaphragm
Ð²Ð‚Ñž High Volume .040" Fuel Pump Diaphragm Gasket
Ð²Ð‚Ñž .006" Fuel Pump Diaphragm
Ð²Ð‚Ñž .375 Welch Plug
Ð²Ð‚Ñž .1875 Cup Plug
Ð²Ð‚Ñž 1.00" Flange Gasket
Ð²Ð‚Ñž 1.060" Flange Gasket
Ð²Ð‚Ñž Captured Viton Inlet Needle
Ð²Ð‚Ñž Captured Fulcrum Arm
Ð²Ð‚Ñž Copper Seat Gasket
Ð²Ð‚Ñž .062Ð²Ð‚Ñœ id Seat (Overall Length .500")
Ð²Ð‚Ñž Brass Fuel Strainer Screen
Ð²Ð‚Ñž Fuel Screen Cork Gasket
Ð²Ð‚Ñž High/Low Side MIxture O-Rings
This kit can rebuild any Standard Volume(Single Stack, Gas) Pump Stack Tillotson Carburetor that uses a .062Ð²Ð‚Ñœ Seat and Captured Fulcrum Arm & Fuel Inlet Needle.
This kit replaces the Tillotson