1. Home
  2. Carburetors
  3. Tillotson
  4. HL-Series
  5. HL-Other
  6. Tillotson 34-216 Captured Viton Inlet Needle
Tillotson 34-216 Captured Viton Inlet Needle
34-216 Tillotson Captured Viton Inlet Needle
Write a Review

Tillotson 34-216 Captured Viton Inlet Needle

Part Number: 34-216
Online Price: $3.23
Inlet Needle Viton Captured
Availability: In Stock.

Send to:

*We'll ask for shipping info at checkout


The Tillotson Fuel inlet Needle regulates fuel flow and volume as it opens and closes in the fuel inlet seat. 

The captured needles have a dowel pin or stem that the fulcrum arm holds or "captures." This keeps the fulcrum arm in contact with the needles at all times. The captured needles are usually used on carburetors that have the pump stack plates facing downward and use mostly on 2-cycle engines

Beware of aftermarket fuel inlet needles and seats. This is the number one problem after a carburetor has been recently rebuilt. The aftermarket kits usually do not seal very well. This is most noticeable at idle and low speed; the carburetor will be flooding fuel, especially from the high side circuit. Use a pop-off pressure gauge to check your pop-off pressure and make sure the needle and seat are not leaking. 

Check your carburetor and carburetor listing for the correct inlet needle.

Related Items

Recently Viewed Items