The Tillotson Fuel Strainer Screen is the internal fuel filter for the Tillotson carburetors that fits under the fuel inlet cap and cork gasket.
However, we recommend using an additional fuel filter inline as the fuel strainer does not filter out smaller debris.
The Silver Fuel Strainer Screen's mesh is finer than the Brass Fuel Strainer Screen. The Silver is what comes stock in most standard volume or known as a single stack or gas pump plate carburetors. This is usually a tech item for 2-cycle racing using gasoline. Check with your rules and carburetor listing before ordering. If you are running methanol or converting your carburetor to run methanol, we recommend using the brass screen. The brass screen mesh is more coarse and less restrictive to fuel flow.
95-174 OE Tillotson Silver Fuel Strainer Screen is universal fitment for Tillotson HL, HB, HR, HW, HM, HX, HD carburetors but is stock on these carburetors: HL-129E, HL-132H, HL-166B, HL-166C, HL-189F, HL-227E, HL-229A, HL-229F, HL-232E, HL-274E, HL-292G, HL-299E, HL-299G, HL-304E, HL-324A, HL-334A, HL-334AA, HL-334AB, HL-334WX, HL-350A, HL-352A, HL-360A, HL-366A, HL-371A, HL-375A, HL-381A, HL-382A, HL-384A, HL-384B,HW-10A, B HW-11A,B, HW-12A, HW-17A, HW-19A, HW-22A, HW-23A, HW-27A, HW-30A, HW-31A, HW-32A, HW-33A, HW-34A, HW-35A, HW-43A, HB-10A, HB-11A, HB-12A, HC-103A,HC-112A, HM-1A, HM-2A, HM-12A, HX-10A, HX-12A