Is the Alfano 6 equipped with a brightness sensor?
Yes, Alfano 6 activates the backlight according to the ambient light. In the "brightness" menu, select "auto."
The Alfano 6 is switched off or does not work correctly while driving.
The problem may come from the boot or spark plug used. Boots or spark plugs without internal resistance generate electromagnetic interference that causes problems with the complex electronics of the Alfano 6. The solution to the problem is the use of a boot or spark plug with internal resistance, identifiable by the product code with the initials "R." Another precaution is to avoid wrapping the RPM wire around the ignition coil and use the red clips provided.
Are the six central LEDs configured only for RPM?
No, you can use these LEDs for the RPM, the exhaust sensor temperature, the difference in lap time, or partial times. For the RPM, defining a threshold (from O to 16,000) is possible. In higher RPM, change the maximum value in "rpm settings." Each of the six central LEDs represents one-tenth of a second for lap time or partial difference. The green LEDs indicate a lead on the best lap of the current session, while the red LEDs indicate a delay.
I noticed that the exhaust temperature measurement with the ALFANO sensor is higher than that of the competition.
Each sensor brand has more or less rapid reaction dynamics. ALFANO has opted for a very sensitive sensor, A2151 « Quality Professional,» which is, therefore, more reactive. The measured temperature is not constant on a motor. Accelerations and decelerations vary abruptly; our sensors can measure higher temperature peaks and lower temperature peaks. The best teams recognize our exhaust sensors, as they allow for a more precise adjustment of the carburation.
How do you download the data or update the Alfano 6?
For downloading and analyzing data, you have our free APPs on Android and iOS that are continually updated. For professionals accustomed to the P.C., we have the A.D.Software on Windows P.C. For the update of the Alfano 6; all our APPs have a firmware version.
It is essential to check if you have the latest APP version on your smartphone or tablet. The download is via Bluetooth or the USB port. To use the USB option on your smartphone or tablet, please have the PN A4520 and a special OTG cable sold in computer stores. Once connected, the app will notify you if new firmware is available for your Alfano 6; you can then update through our app.
I noticed that my Alfano 6 has spelling mistakes. Bug?
We are constantly evolving. Do not hesitate to send us your comments at [email protected]; we will act very quickly. You can easily send your saved data to ALFANO S.A. from your app. This will also improve the circuit database.
