1. Home
  2. Clutch, Chain & Driveline
  3. EC EGO 1-2-3-Disc Clutch
  4. EGO Clutch Engagement Springs
EGO Clutch Engagement Springs
EGO Clutch Engagement Springs
Write a Review

EGO Clutch Engagement Springs

Part Number: EGO-18
Online Price: $3.00
EGO-18 Clutch Springs – Stall Speed Adjustment for EGO Clutches
Availability: In Stock.

Send to:

*We'll ask for shipping info at checkout

Description

EGO-18 EGO Clutch Springs


The EGO-18 Clutch Springs are precision components designed to control clutch engagement in EGO-based clutches. Each spring is secured in place by the EGO-19 Adjusting Screw and the EGO-20 Spring Retaining Washer, pressing against the EGO-12 Activator Plate to maintain proper alignment and pressure.


These clutch springs regulate the amount of pressure the EGO-16 Clutch Lever must apply to engage the clutch. By adjusting spring height and tension, you can fine-tune your clutch’s stall speed:

  • Higher pressure / shorter spring height ? More RPMs required to engage the clutch.
  • Lower pressure / taller spring height ? Fewer RPMs required to engage the clutch.


This adjustability makes the EGO-18 springs essential for dialing in clutch performance to match your application. Detailed instructions for setting stall speed are available on our technical page.


Key Features:

  • Part #: EGO-18 Clutch Springs
  • Works with EGO-19 Adjusting Screw and EGO-20 Spring Retaining Washer
  • Controls clutch engagement pressure and stall speed
  • Fits EGO-based 3/4-inch and 1-inch disc clutches
  • Compatible with popular models, including:
    • Viper
    • Gator

The EGO-18 Clutch Springs allow you to fine-tune clutch engagement and achieve the perfect stall speed for your setup.

FAQ

Q: What do the EGO-18 Clutch Springs do?
A: The EGO-18 springs regulate the pressure needed for the EGO-16 Clutch Lever to engage the clutch, allowing you to adjust stall speed for performance tuning.

Q: How do clutch springs affect stall speed?
A: Higher pressure or shorter springs require more RPMs to engage the clutch, while lower pressure or taller springs engage at fewer RPMs.

Q: Which components work with the EGO-18 springs?
A: They are held in place by the EGO-19 Adjusting Screw and EGO-20 Spring Retaining Washer, pressing against the EGO-12 Activator Plate.

Q: What clutches are compatible with the EGO-18 springs?
A: They fit EGO-based 3/4-inch and 1-inch disc clutches, including Viper and Gator models.

Q: Do you provide instructions for adjusting stall speed?
A: Yes, detailed instructions are available on our technical page to guide you through adjusting spring height and pressure.

Related Items

EGO Clutch .090 Floater Plate
$16.50
Out of Stock.
EGO Clutch Key 3/16 x 3/4
$6.00
In Stock.

Recently Viewed Items