1. Home
  2. Engines
  3. Wildcat Engines
  4. WildCat 223 Engines
  5. WildCat 223 Rotating Assembly
  6. WildCat 58mm/2.283 Stroke Crankshaft
WildCat 58mm/2.283 Stroke Crankshaft
WildCat 58mm Crankshaft for Clone/Predator Small Block Engines - 3/4 View
Write a Review

WildCat 58mm/2.283 Stroke Crankshaft

Part Number: 168F-12100-58mm
Online Price: $99.99
Availability: In Stock.

Send to:

*We'll ask for shipping info at checkout


The 58mm Crankshaft is stock in the WildCat 223 engines and a stroker for most clone and predator small block engines. 

The 58mm crankshaft is made of ductile iron. Ductile is the ability to bend or flex before breaking. The ductile iron has superior shock absorption and higher fatigue strength performance over lesser cast crankshaft. The 58mm or 2.283" stroke is a great way to stroke your clone or predator without spending a fortune on billet crankshafts. The crankpin and journals are hardened to reduce wear and increase the strength of the crankshaft. 

ARC Clone Rod works with the crankpins but may require clearance to fit the block and not interfere with the camshaft. Therefore this is not a drop-in solution but requires an experienced engine builder to assemble. 

Crank Pin: Clone
Flywheel Taper: Clone

Engine Displacement Increase
- 196 Stock - 68 Bore x 58mm = 210.68cc
- 212 Stock  - 70 Bore x 58mm = 223.21cc
- 225 Stock  - 72 Bore x 58mm = 236.15cc
- 2.815 or 71.5mm x 58mm = 232.88cc

*Note engines with the 58mm crankshafts, including the Wildcat 223, Predator 224, or any of the EC Stroker Kits may require clearance for the compression release to pass the crankshaft weights. 

Related Items

Recently Viewed Items