1. Home
  2. Chassis & Axles
  3. Front Axles & Components
  4. 7/16 x 1-1/8 Spindle King Pin Ball Bearing
7/16 x 1-1/8 Spindle King Pin Ball Bearing
2538 7/16” x 1-1/4” Spindle King Pin Ball Bearing
Write a Review

7/16 x 1-1/8 Spindle King Pin Ball Bearing

Part Number: 2538
Online Price: $2.95
Ball Bearing 7/16 x 1-1/8 Spindle King Pin
Availability: Out of Stock.

Description

7/16" x 1-1/8" Ball Bearings for Spindle King Pins – Free-Spinning, Low-Drag Design


Our 7/16" x 1-1/8" spindle king pin bearings are engineered for maximum efficiency and minimal resistance—perfect for racing applications where precision and speed matter most. These bearings use low-contact seals and are supplied with little to no grease (unless otherwise noted) to reduce rolling drag and allow for free spinning performance.


Ideal for use in go-kart king pin spindles or similar lightweight suspension and steering components, these bearings are best maintained with regular lubrication using a high-quality bearing oil like Lubtek or TRI-FLO. Avoid using penetrating oils, which are not designed for long-term bearing performance.


Bearing Specifications:

  • Inside Diameter (ID): 0.4375" (7/16")
  • Outside Diameter (OD): 1.125" (1-1/8")
  • Width: 0.374"
  • Seal Type: Low-contact for reduced drag
  • Lubrication: Light or dry for free spin (oil recommended)


Key Benefits:

  • Designed for smooth rotation and minimal resistance
  • Ideal for spindle king pins on racing go-karts and lawnmowers
  • High-speed performance with regular oiling
  • Easy to maintain and replace
  • Durable steel construction with low-drag sealing

Keep your front-end steering tight, responsive, and fast with precision bearings built for race day conditions.

FAQ

Q1: What are these bearings used for?

A: These bearings are primarily used in the spindle king pins of racing go-karts and lawnmowers, where smooth, low-resistance steering is essential.


Q2: Are the bearings pre-lubricated?

A: They come with minimal to no grease, designed for free spinning. We recommend oiling them with a light bearing oil before every race.


Q3: What type of oil should I use?

A: Use a high-quality bearing oil like Lubtek or TRI-FLO. Avoid using penetrating oils, which can break down lubrication and damage seals.


Q4: What size are these bearings?

A:

  • Inside Diameter: 0.4375" (7/16")
  • Outside Diameter: 1.125" (1-1/8")
  • Width: 0.374"


Q5: Why use low-contact seals?

A: Low-contact seals reduce drag, allowing the bearing to spin more freely, which is critical in high-speed, precision racing applications.

Related Items

Recently Viewed Items